WPS settings are not working for tplink repeater

This is easy that you can use WPS configurations for your tplink wifi repeater devices for adding these devices to your home network. If you use WPS or wifi protected setup for your device, you can enjoy internet connections for your wireless devices. 

Sometimes you can also get WPS configurations for your tplink wifi extender device and in that case you will need to follow some simple troubleshooting tips for your device. In this article we are explaining the steps for resolving the WPS issues for your device. We home that you can get the internet connections for your device once these troubleshooting tricks are applied to your devices. 

·        When you perform WPS settings for tplinkrepeater.net device, you will need to place your tplink repeater device near to your router device.

·        If power supply is not correct or accurate for your tplink extender device then also you can’t find the WPS settings for your device.

These are two simple tricks that you will need to follow if you can’t find the WPS settings for your tplink wifi extender and computer devices.

Access point settings for Netgear router devices

Access point settings for Netgear wifi router device are possible using the Netgear router login page and most of the Netgear users face issues for accessing the Netgear router login page. In this article we are explaining the steps using these steps you can configure the access point setting for your devices. 

Here are the Steps to Configure Netgear Router Devices for Access Points

·         First access the Netgear router login page for your device and that will possible if you have connected your device using Ethernet cables.

·         Using router login address you can find the smart setup wizard for your device.

·         Fill login user name and password for your settings and once you get the smart setup wizard for your device, you can configure the access point settings for your device.

·         Select “Wireless Settings” option for your Netgear wifi router device.

·         Select the check box and you can enable the access point settings for your Netgear wifi router device.

You can save the settings by clicking on the “Save” button for your device. If you face issues for your device settings then you must install the Netgear router settings application for your network and then you can get the access point and extender device settings for your device.  

Security cameras for apartments

If you are using smart devices at your home, then you may face difficulty while installation. So, it is important to get the devices which do not require installation process.

Some of the most common example of these smart cameras which we generally use at our home is petcam and the baby monitors

Why to Choose Nest Cams?

IF you want that your cameras are very easy to use, then nest cams are the best option for you. Most of the persons use this camera due to its geofencing feature. So, if you are using this camera by making the use of your camera location, these cameras will automatically switch on when you leave your house. When you enter your home back, then these cameras will automatically switch on. 

If we talk about the alexa and Google type of security cameras, they both can easily place in the apartments. But the major drawback of using these cameras is that they do not support the functionality of voice control. While you are going to bed you need to ask the alexa type of cameras to get switch on. There is no home screen and echo for these cameras.

Download the latest app for security cameras from arlo Netgear app.

Through the crucial family account feature you can talk to 10 phones on a single time.

What is the reason to invest money on standalone cameras?

As we all know that technology keeps on changing day by day so, if you spend your money on cameras which are having sensors attached to them, then due to change in the technology, they also changes after the short interval of time.

So, what is the drawback of using nest cameras?

The nest cameras can record videos having 1080 HD streaming and those cameras that supports 130 degree field of view. They also have feature of sound view which can be easily available in the other cameras too.

Get details for setting up drivecam

If you have trucks or taxi then you will need to install this advance device for your cab. Drivecam device will allow you to have security settings for car. If you have a driver then you have to install this device for your location and once the installations are done for your device, you will get all facilities security settings for your cab.

·         When you install the drivecam for your cab then must install the wires very carefully and user manual will help you in this.

·         The surface where you are connecting your device then first clean that surface with any cloth.

·         These camera devices can easily record the videos for front and rear side and that is why you can have easy connections and recordings for your car and truck.

·         You will need to provide VER serial number of your device to the drivecam management. These VER numbers are used so that you have all security settings for your device.

·         You will need to find the firmware and other latest updates for your device from online utility. If you need to access the configuration page for drivecam then you can use lytx http:// drivecam.com web address for your network.

These are the common things that you will need to make sure for your drive cam and if you need to get more details for drivecam online lytx drivecam drivecam.com login lytx drive cam www.drivecam.com log-in then you can visit the actual website for that.

Integrate Arlo security Camera with the Samsung SmartThings App

 If you are having Samsung SmartThings application for your smart phone then you can make use of this advance application for making all configurations for your Arlo camera devices. Arlo security cameras are manageable using Arlo application and http:// Netgear.arlo.com web address but if you are already having Samsung SmartThings application then you can integrate your Arlo login window with the Samsung application and then you will get all configurations for your devices.

Here are the Steps that you Need Arlo Camera with Samsung Application

·         First you will need to disarm your Arlo cameras from the Arlo application from your mobile phone.

·         After that access the SmartThings application from your mobile phone.

·         You will first need to fill the application login user name and password and if you do not have SamrtThings application then you can sign up for a new account.

·         Go for “Marketplace” from your application window.

·         After that choose “Things” tab for your device.

·         There you will find the “Safety and Security” option for your device.

·         Choose “Netgear Arlo” option under “Cameras” option.

·         Click on “Connect” button so that you can mount your Arlo camera device with SmartThings mobile application.

·         You will need to fill some required details regarding your Arlo camera devices like your Arlo camera name and policy details.

·         First click on “Done” button and then you can choose “Next” and at last click on “Done” once again.

These steps will allow you to mount your Arlo camera device with Samsung application. You can now manage all configurations for your device from a remote application and make sure that you are having better configurations for your home network.