bridge mode settings for Netgear Nighthawk X4 device

when you have a large WiFi coverage area and you want that all your devices must have internet connections then you will need to install one more WiFi router device to your location. This WiFi router device will work as an bridge between your main router and device that is connected to your home network.

In this way, a router device that is connected over bridge mode will work as an WiFi extender device that will boost the WiFi signals and your devices will have WiFi connectivity very easily. In this article we are going to explain the steps so that you can easily manage the Netgear Nighthawk X4 device for the bridge mode settings. Before you proceed for the configurations, cross check the internet connections for your devices because internet connections will require at a high speed for your devices.

Here are the Steps to Manage the Bridge Mode Setting for your Netgear Nighthawk X4 device

·         Connect your Netgear Nighthawk X4 device to a computer device and that computer device will help you to configure the bridge mode settings for your devices.

·         Launch the web browser and fill http:// 192.168.0.1 admin address in the address bar.

·         Fill the Netgear WiFi router login user name and password for your device.

·         Choose the “Advance” option for your device.

·         Using the check box you can enable the bridge mode settings for your Netgear Nighthawk X4 device.

·         You can configure the 2.4 GHz and 5 GHz settings for your device because all Netgear WiFi router devices can be managed for these both possible bands.

·         Click on the “apply” button so that you can save the settings for your device.

These are the steps to manage the bridge mode settings for your Netgear Nighthawk X4 device. You can now place your device to a location where you want to have internet connections for your devices.